This collection is largely made up of unpublished information from the Edinburgh Wave Power Project which is now incorporated in the Institute for Energy Systems, within the School of Engineering, at the University of Edinburgh. The Edinburgh Wave Power Project was set up in 1974 - the year that the Energy Technology Support Unit (ETSU) began its ambitious wave power programme. Stephen Salter had invented the ' Edinburgh Duck' in 1973 in response to the oil crisis.

Collections in this community

Recent Submissions

  • Power conversion systems for Ducks 

    Salter, Stephen Hugh (IEE 'Future Energy Concepts' Conference, 1979-01-30)
    This paper tries to define the problems of power conversion for a wave power device . It presents a little of the background theory; it discusses design principles, existing components and modifications to them; it tries ...
  • Power from sea waves 

    Salter, Stephen Hugh; 1 (The University of Edinburgh, 1974-03)
    There are people, until recently regarded as eccentric, who question our practice of treating as income those resources which our descendants will regard as capital. That apart, there are difficulties in satisfying ...
  • Solo Duck Mooring Forces 

    Woodhead, Peter Linnet (The University of Edinburgh, 1993-03-12)
    One of the major difficulties in the design of a wave energy device is the occasional occurrence of severe conditions at sea. The largest waves far exceed typical amplitudes over the year. Although it would be possible ...
  • Preliminary report on the use of tunnels for power transmission 

    Berry, N.S.M. (The University of Edinburgh, 1979-10-15)
    The potential for power generation from wave action increases with the distance off shore and the initial study has suggested that a location some 15 kilometres to the west of Uist would be attractive. The transmission ...
  • Bending moments of short spines 

    Retzler, Chris-Heinz; Salter, Stephen Hugh (1984-09-05)
    The Lanchester Polytechnic's 'Clam' wave energy device consists of a series of flexible air bags driving self-rectifying turbo-generators, mounted on an unjointed spine. The device is designed to be moored at about 35 ...
  • EWPP - SCOPA - Laing, 5th year report, Volume 2, Appendix 

    Salter, Stephen Hugh; Williams, Peter B. (The University of Edinburgh, 1979-11)
    1. Mechanical Design Philosophy and Calculations 2. Civil Design Philosophy and Calculations 3. Alternative Beaks 4. Lists of Drawings 5. Contributing Manufacturers with their comments 6. Reliability Considerations 7. ...
  • Parrots and monkeys 

    Jeffery, David Crighton (The University of Edinburgh, 1982)
    Before this series of experiments, Narrow Tank Duck control strategy had been researched by varying damping and spring in the three modes, nod, heave and surge. The justification for using this simple system was that ...
  • Edinburgh wave energy device moorings 

    Bullas, Michael (The University of Edinburgh, 1980-01)
    These notes are intended to bring together the various aspects of mooring of the Edinburgh Device known at the present time. Model tests indicate that the mooring forces for the device are substantially below those of other ...
  • EWPP - SCOPA - Laing, 5th year report, Volume 2, Drawings 

    Salter, Stephen Hugh; Williams, Peter B. (The University of Edinburgh, 1979-11)
    Engineering drawings of the Edinburgh Duck, consisting of: Artists Impression, G.A. of 10m Duck (25m wide), G.A. Flywheel Assembly, G.A. Spine Joint, Schematic of Power Cable Take-Up, Ring Cam Pump Assembly, Plan View Ring ...
  • Some Numerical Results for the Flat and Tall Floats 

    Pizer, David (The University of Edinburgh, 1994-08-26)
    Graphs are given for the added mass matrix, damping matrix and excitation force vector for the two floats discussed at the Hanstholm meeting. The flat float has a diameter of 6m, a height of 1.5m and is half submerged, ...
  • Comparing wave power from a Northern and a Southern site 

    Stoaling, P.M. (The University of Edinburgh, 1978)
    Instantaneous wave power at a single site varies considerably with time. Combining the power outputs from two distant sites could be a way of reducing the variation in instantaneous power output. Wave data from Boyle, ...
  • Long spines with appendages 

    Rezler, Chris-Heinz (The University of Edinburgh, 1987)
    Spines are generic to a number of wave energy devices . Ducks use round spines with very low freeboard. Other devices use spines which are, for example, rectangular in section, or have higher freeboards. This report ...
  • Absorbing wave makers and wide tanks 

    Salter, Stephen Hugh (Proceedings of the Conference on Directional Wave Applications, 1981-09)
    Experiments aimed at generating power from sea waves used models which sometimes reflected waves back to the wave-maker. The difficulty was avoided by changing the wave-maker control system so that it could absorb reflections. ...
  • Bending moments in long spines 

    Taylor, Jamie Richard Mackenzie; Salter, Stephen Hugh (The University of Edinburgh, 1984-08)
    While it is unusual to test tank-models with controlled, variable elasticity there are several reasons why we believe that it is im-portant to exert the large effort required. 1. The convenient model-building materials ...
  • Sonar Ranging 

    Rogers, Douglas James (The University of Edinburgh, 1987-08)
    The purpose of this project is to develop a working instrument for use in model test tanks which will allow the convenient measurement of all three axes of water movement.
  • Optimal Control of a Duck 

    Nebel, Paul (The University of Edinburgh, 1992-05)
    Experimental values have been obtained for optimal (complex-conjugate) control of an Edinburgh Duck model in the presence of unidirectional monochromatic incident waves, in a one-dimensional test tank of intermediate depth. ...
  • Design Considerations of Submarine Power Links 

    Wallace, Alexander Robert Swan (The University of Edinburgh, 1976-05)
    The high installation and repair costs incurred in the transfer of electrical power across an expanse of water suggest careful consideration should be given to the choice of the route followed by the submarine cable. The ...
  • Moorings, current state of development 

    Bullas, M. (The University of Edinburgh, 1980-01)
    These notes are intended to bring together the various aspects of mooring of the Edinburgh Device known at the present time. Model tests indicate that the mooring forces are substantially below those of other floating ...
  • Transmission of electricity from wave power devices 

    Whittington, Herbert William (1976)
    This report assesses the problems likely to be encountered in transmitting bulk electrical energy from a source tens of kilometers offshore to the mainland of the United Kingdom.
  • A Spinning Cylinder in Waves 

    Rezler, Chris-Heinz (The University of Edinburgh, 1987-07)

View more