Show simple item record

dc.contributor.advisorRobertson, Neil
dc.contributor.advisorYellowlees, Lesley
dc.contributor.authorHewat, Tracy Elizabeth
dc.date.accessioned2016-10-28T13:56:13Z
dc.date.available2016-10-28T13:56:13Z
dc.date.issued2013-11-28
dc.identifier.urihttp://hdl.handle.net/1842/17075
dc.description.abstractDye design is one of the most important and challenging areas in dye-sensitised solar cell research. The purpose of the work in this thesis is to synthesise and characterise novel ruthenium(II) and copper(I) dyes that will provide insight into the number of binding groups required and the potential use of chromophoric ligands. A series of four simple Ru(II) dyes have been synthesised with the general formula Ru(4,4’- (R)-bipyridine)2(NCS)2 where R represents CH3 or CO2H. The study investigates the number of acid groups required to successfully bind to TiO2 whilst maintaining efficient charge injection. The series consists of one acid group, two acids, two acids on adjacent bipyridines, and three acids groups. Dye uptake was studied via optical waveguide spectroscopy, providing information on dye diffusion, adsorption and desorption kinetics, and surface coverage. Interestingly, the two acid groups on adjacent ligands suggested poor/slow binding to TiO2 surface and a high degree of dye aggregation in comparison to two acid groups on the same ligand. The dye with three binding groups showed strong adsorption to TiO2 and better dye coverage, resulting in a high efficiency. The complexes were all fully characterised by electrochemistry, photoluminescence, absorption spectroscopy, DFT calculations and solar cell performance testing. To date, there has been limited exploration of copper(I) complexes as potential alternatives to ruthenium(II) sensitisers, with even fewer publications reported for Cu(I) heteroleptic species. The neutral complexes that were synthesised are of the general formula: Cu(4,4’- (R)-6,6’-(CH3)-bipyridine)(β-diketonate) and Cu(4,4’-(R)-6,6’-(CH3)-bipyridine)(dipyrrin) where R represents CH3 or CO2Et. Additional blocking groups on the ligands are introduced to minimise structural change during oxidation or MLCT excitation. Improved stability and reproducibility have been shown for complexes containing the dipyrrin ligand, likely due to better steric constraints and better π-overlap with the bipyridine. There has also been a remarkable improvement in light absorption, from 450 nm to 600 nm. In-situ solar studies have been carried out on the Cu(4,4’-(R)-6,6’-(CH3)-bipyridine)(dipyrrin) series and a 0.41% efficiency has been achieved. Computational studies supports the experimental data in which the main transition appears to be ligand centred (dipyrrin) with a small MLCT contribution.en
dc.contributor.sponsorEngineering and Physical Sciences Research Council (EPSRC)en
dc.language.isoenen
dc.publisherThe University of Edinburghen
dc.relation.hasversionC. L. Linfoot, P. Richardson, T. E. Hewat, O. Moudam, M. M. Forde, A. Collins, F. White, N. Robertson, Dalton Transactions, 2010, 39, 8945-8956.en
dc.subjectdye-sensitised solar cell researchen
dc.subjectruthenium(II) dyeen
dc.subjectcopper(I) dyeen
dc.subjectchromophoric ligandsen
dc.subjectMLCTen
dc.titleExploring copper(I) and ruthenium(II) dyes for their use in dye-sensitised solar cellsen
dc.typeThesis or Dissertationen
dc.type.qualificationlevelDoctoralen
dc.type.qualificationnamePhD Doctor of Philosophyen
dc.rights.embargodate2100-12-31en
dcterms.accessRightsRestricted Accessen


Files in this item

This item appears in the following Collection(s)

Show simple item record